AMSOIL Synthetic Lubricants

Long-Lasting Service:
AMSOIL lubricants have a long service life. Non-synthetic lubes can break down from oxidation and heat. When that happens, they sludge-up, form deposits and have to be changed.

AMSOIL lubricants resist breakdown, so they stay intact and run clean. This resistance to heat and oxidation prolongs the service life of AMSOIL synthetic lubricants, significantly
extending drain intervals.

Low Temperature Fluidity/High Temperature Stability:
AMSOIL lubricants resist the effects of heat and cold far better than nonsynthetic lubricants. AMSOIL synthetics will make the difference when starting an engine that’s cold, and cooling an engine that’s hot.

Rust and Corrosion Protection:
AMSOIL contains special additives to prevent rust and corrosion – a vital factor for equipment that sits idle or is stored for part of the year.

Anti-Friction:
AMSOIL lubricants are “super-slippery.” They are extremely effective in reducing friction and drag between moving parts, resulting in reduced wear, more efficient operation and
better fuel economy.

Versatile For Most Applications:
In most cases, AMSOIL lubricants eliminate the need for specialty lubes. AMSOIL products meet or exceed the performance specifications of a wide variety of farm machinery.

 

 

 

AMSOIL Synthetic Greases

AMSOIL Synthetic Greases Outperform Ordinary Grease

AMSOIL synthetic extreme pressure lithium complex greases offer outstanding protection and extended service lives.

Load-Bearing and Extreme Pressure Protection
AMSOIL synthetic extreme pressure lithium complex greases offer outstanding protection in high-load and extreme-pressure operations. The great film strength
of synthetic base stocks, mechanical stability of lithium complex thickeners and the protective shield provided by extreme-pressure agents make AMSOIL greases top of the line.

Friction Reduction
AMSOIL synthetic extreme pressure lithium complex greases have a low coefficient of friction that helps keep wear rates low and efficiency high by minimizing friction.

High- and Low-Temperature Performance
Outstanding thermal and oxidative stability allow AMSOIL synthetic greases to protect in higher temperatures than conventional greases without breaking
down or forming deposits. Outstanding cold-temperature pumpability allows them to protect in lower temperatures than conventional greases.

Additional Benefits
Excellent washout resistance and corrosion inhibition offer outstanding protection in wet applications or for stored equipment.

Series 2000 Synthetic Racing Grease
AMSOIL Series 2000 Synthetic Racing Grease (GRG) is formulated for high-speed/hightemperature and low-speed high-load applications. It provides the load-bearing capacity of a heavy-duty grease and the high-temperature protection of a multi-purpose grease.

Synthetic Heavy Duty Greases
AMSOIL Synthetic Heavy Duty Greases (GHD) are moly-fortified greases formulated for low-speed high-load applications. They provide dependable
performance in extreme pressure conditions.

Synthetic Multi-Purpose Greases
AMSOIL Synthetic Multi-Purpose Greases (GLC) are formulated for high-speed/high-temperature service. Their outstanding thermal and oxidative stability inhibits deposit formation and grease breakdown in high-temperature applications. Their superior friction-reducing ability helps keep high-speed components operating in their optimal temperature range and helps keep them running clean.

Synthetic Water Resistant Grease
(GWR) is an extreme-pressure lithium complex wheel bearing grease specially formulated for extreme resistance to water washout. It is the grease of choice for protection of frequently wetted components, such as marine trailer wheel bearings. AMSOIL Water Resistant Grease forms a shield against rust and corrosion, protecting components during use and storage.

 

Fifth Wheel and Open Gear Compound

AMSOIL Synthetic Fifth Wheel and Open Gear Compound (GFW) provides outstanding truck tractor fifth wheel lubrication and protection. AMSOIL Synthetic Fifth Wheel and Open Gear Compound adheres to metal surfaces that are dirty or otherwise poorly prepared for lubrication, making it ideal for hard-to-service equipment operating in hostile environments.

AMSOIL Synthetic Fifth Wheel and Open Gear Compound resists water washout, protecting fifth wheels that are exposed to water. Top-quality anti-rust and anti-corrosion agents protect surfaces from the rust and corrosion water exposure may cause.

AMSOIL Synthetic Fifth Wheel and Open Gear Compound offers superior protection in high and low temperatures. It does not flake in low temperatures or soften in high temperatures.

AMSOIL Synthetic Fifth Wheel and Open Gear Compound sprays on. It’s quick, neat and economical to use.

AMSOIL Greases for All Applications

GRG Series 2000 Synthetic Racing Grease, NLGI #2, GC-LB

GHD Synthetic Heavy-Duty Grease with moly, NLGI #2, GC-LB

GHB Synthetic Heavy-Duty Grease with moly, NLGI #1, GC-LB

GLC Synthetic Multi-Purpose Grease, NLGI #2, GC-LB

GLB Synthetic Multi-Purpose Grease, NLGI #1, GC-LB

GLA Synthetic Multi-Purpose Grease, NLGI #0

GLC Synthetic Multi-Purpose Spray Grease

GWR Synthetic Water Resistant Grease, NLGI #1-1/2, GC-LB

GVC Synthetic High Viscosity Lithium Complex Grease

GSF Synthetic Lithium Complex 00 EP Spy Grease, NLGI 00

GXC Synthetic Aluminum Complex Food Grade Grease

GFW Synthetic Fifth Wheel & Open Gear Compound, AGMA 14R

 

AMSOIL Synthetic Motor Oils

Outstanding Performance At Extreme Temperatures

AMSOIL Flows in the Cold
Non-synthetic oils thicken rapidly as the temperature drops. In cold weather, this causes difficult starting as the engine fights to turn over against the semi-solid lubricant. Even
if the engine starts, the cold, thick oil will not circulate immediately, which means some parts of the engine can run for up to five minutes without any lubrication at all.

AMSOIL stays fluid at much lower temperatures. In cold weather, AMSOIL permits easier starting and instant lubrication throughout the entire engine. During starts and warm-ups,
critical engine surfaces slide, protected by a tough, reliable film of oil between them.

AMSOIL Takes the Heat
A hard-working engine generates tremendous heat, a serious problem for non-synthetic lubricants. Oil thickening and oil consumption occur when high temperatures evaporate
the lighter, more volatile portions of petroleum-based oil. Heat also causes oxidation, forming gummy sludges and varnishes.

AMSOIL is heat-stable. AMSOIL resists volatile evaporation and thickening at high temperatures. It resists oxidation and inhibits the formation of engine deposits.

Low volatility means reduced oil consumption. Reduced thickening promotes
better fuel economy (because thick oil causes internal engine resistance) and better engine protection, especially during cold start-ups when thick oil doesn’t circulate properly.

AMSOIL actually cools hot engines and gear boxes too, reducing stress on components nd
extending equipment life.

Availability:
AMSOIL synthetic motor oils are available in quart, gallon and 2.5-gallon containers, and 30- and 55-gallon drums.

Performance:
AMSOIL Synthetic Diesel Oils are fuel efficient, super-heavy-duty, multi-viscosity lubricants for use in light and heavy-duty diesel and gasoline engines. Their synthetic base stocks
and proven long-life additives assure performance, economy, and outstanding protection over extended drain intervals.

Because they meet and exceed the lubrication demands of virtually every light and heavy-duty diesel and gasoline engine, farmers with a variety of vehicles need only stock one of
these “all-engine” oils for their vehicles and equipment.

AMSOIL Diesel Oils

HDD SERIES 3000 - SAE 5W-30 Synthetic Heavy Duty Diesel Oil

DEO Synthetic 5W-40 Premium Diesel Oil

AME SAE 15W-40 Synthetic Heavy Duty Diesel and Marine Motor Oil

ACD SAE 10W/SAE 30 Synthetic Diesel Oil

PCO SAE 15W-40 Synthetic Blend Diesel Oil

 

 

AMSOIL Synthetic Gear Lubes

(API GL-5/MT-1) Extre me Pressure Synthetic Gear Lubes 75W-90, 80W-90, 75W-140, 80W-140

Farmers need to cut costs wherever and whenever they can. AMSOIL Synthetic Gear Lubes save money by making drive trains operate as efficiently as possible, for as long as possible.

Reduce Friction:
AMSOIL Synthetic Gear Lubes are blended with outstanding anti-friction properties. Friction in transmissions and differentials steals energy. Lost energy translates into less power and poor fuel economy. The superior “slipperiness” of AMSOIL Gear Lubes makes gear-boxes run cooler and easier. Components move with less resistance, even under heavy loads. Transmission parts last longer and the saved energy is transmitted to the
wheels, allowing maximum use of every gallon of fuel.

Reduce Wear:
The outstanding extreme pressure and anti-wear properties of AMSOIL Synthetic Gear Lubes keep wear at an absolute minimum. The results: greater equipment reliability and less money spent on repairs, replacement parts, and costly down-time. AMSOIL helps keep equipment in the field and out of the shop!

AMSOIL Severe Gear Lubricants

SVG SEVERE GEAR 75W-90

SVT SEVERE GEAR 75W-110

SVO SEVERE GEAR 75W-140

 

AMSOIL Fuel Additives

AMSOIL provides top-quality fuel additives for gasoline and diesel applications. Four-wheel drive vehicles benefit from the fuel enhancement properties found in AMSOIL fuel additives.

AMSOIL Diesel Concentrate
AMSOIL Diesel Concentrate (ADF) is a total system cleaner and lubricity improver for all types of diesel engines. AMSOIL Diesel Concentrate compensates for the quality variances of different fuels (including biodiesels) and the deficiencies of today’s ultra-low sulfur diesel fuel for better engine operation. It reduces
cylinder wear, retains TBN longer, minimizes soot loading and acts as a fuel stabilizer. AMSOIL Diesel Concentrate restores horsepower to like-new levels
and improves fuel economy by up to five percent.

AMSOIL Cold Flow Improver
AMSOIL Cold Flow Improver (DFF) for diesel fuel is designed for use in ultra-low sulfur diesel fuel, yet works well with conventional fuels. It functions by
modifying wax crystal formation at low temperatures to depress the pour point and improve cold flow filtration properties. AMSOIL Cold Flow Improver contains jet fuel-type deicer to help prevent ice formation in fuels contaminated with water. It is recommended for use with diesel engines and is compatible with
diesel exhaust particulate filters. AMSOIL Cold Flow Improver is excellent for use with AMSOIL Diesel Concentrate and AMSOIL Cetane Boost Additive.

AMSOIL Cetane Boost
North American diesel fuel is notoriously cetane-deficient. Often, the performance problems drivers blame on their diesel engines, like rough running and a
lack of power, are actually caused by cetane-deficient diesel fuel.

Instead of igniting smoothly, low cetane fuel explodes, sending shock waves through the combustion chamber and throughout the engine. AMSOIL Cetane Boost (ACB) (for use in all diesel engines) raises cetane three to seven numbers, helping engines start dependably and run smoothly and powerfully. AMSOIL diesel fuel additives are alcohol-free for seal protection. AMSOIL diesel fuel additives may be mixed during fueling.

AMSOIL Fuel Additives For Diesel Applications

ADF Diesel Concentrate Performance Fuel Additive

DFF Diesel Cold Flow Improver

ACB Cetane Boost Diesel Fuel Additive

 

AMSOIL Synthetic Tractor Hydraulic/Transmission Oil

Improves Performance and Reliability. . . Saves Time and Money SVG-16 ATH-55 HDD-30

Most hydraulic/transmission failures are caused by contamination or breakdown of the hydraulic fluid. Excess heat is a major enemy of hydraulic/transmission fluids. Non- synthetic hydraulic fluids are likely to oxidize when exposed to the extreme environment of tractor transmissions and hydraulic systems. Oxidation leads to the formation of acids, varnish and sludge deposits. This can thicken oil, reduce lubricating abilities, accelerate wear, damage hoses and lead to further overheating and catastrophic component failures.

AMSOIL Tractor Hydraulic/ Transmission Oil (ATH) is made up of thermally stable and chemically resistant synthetic base stocks, and premium- quality additives.

AMSOIL ATH is highly resistant to heat breakdown and chemical changes. It is a better "carrier” for heat transfer, so equipment runs 20° to 50° cooler. All of this means more
efficient and economical operation, with less maintenance and profit-stealing downtime.

The durability of AMSOIL ATH allows drain intervals two to three times longer than those of conventional fluids. This saves time, effort and money because you buy fluid less often.
Cooler operation with AMSOIL ATH increases fuel economy and equipment life, especially for hoses, which are susceptible to heat damage.

AMSOIL ATH also provides superior protection against rust and corrosion, a critical form of protection during equipment storage.

AMSOIL Synthetic Tractor Hydraulic/ Transmission Oil is “all weather” oil that operates over a wide range of temperatures. It has a high viscosity index to maintain its lubricity at high
operating temperatures, and it flows at temperatures as low as -47°F for improved equipment operation and wear protection. It exceeds the most demanding “all weather” specifications of both Ford New Holland FNHA 2-C-200 & 2-C-201 and John Deere J20C & J20D, eliminating the need for seasonal oil changes.

TRACTOR HYDRAULIC/TRANS OIL SAE 5W-30

TRACTOR HYDRAULIC/TRANS OIL SAE 5W-30

Formulated for "All Weather" Performance in Farm and Commercial Equipment.
Stock # Name Retail  
ATHQT TRACTOR HYDRAULIC/TRANS OIL SAE 5W-30 1 QUART ea (each) 7.20 Order Now
ATHQT TRACTOR HYDRAULIC/TRANS OIL SAE 5W-30 12 QUARTS ca (case) 85.20 Order Now
ATH05 TRACTOR HYDRAULIC/TRANS OIL SAE 5W-30 5 GALLON PAIL 122.25 Order Now
ATH30 TRACTOR HYDRAULIC/TRANS OIL SAE 5W-30 30 GALLON DRUM 594.00 Order Now
ATH55 TRACTOR HYDRAULIC/TRANS OIL SAE 5W-30 55 GALLON DRUM 1004.00 Order Now
Preferred Customer Wholesale Pricing

PRODUCT DESCRIPTION
AMSOIL Synthetic Tractor Hydraulic/Transmission Oil is an “all weather” Universal Tractor Transmission Oil (UTTO) engineered to meet the tough demands of heavy-duty, hydraulic-powered farm and commercial equipment. Its unique formulation of synthetic base stocks and additives effectively reduces wear, resists heat, protects against rust and extends fluid and equipment service life. Synthetic Tractor Hydraulic/Transmission Oil is recommended for extended oil drains based on oil analysis.

Excellent Protection in Temperature Extremes
AMSOIL Synthetic Tractor Hydraulic/Transmission Oil operates over a wide range of temperatures. It has a high viscosity index to maintain its lubricity at high operating temperatures, and it flows at temperatures as low as -47°F (-44°C) for improved equipment operation and wear protection at low temperatures. Synthetic Tractor Hydraulic/Transmission Oil exceeds the most demanding “all weather” specifications of both Ford New Holland FNHA-2-C-200 & 2-C-201 and John Deere J20C & J20D, eliminating the need for seasonal oil changes.

Smooth Brake Operation
AMSOIL Synthetic Tractor Hydraulic/Transmission Oil is formulated with durable friction modifier additives that effectively suppress wet brake chatter. Unlike conventional oils that can break down and cause vibration, AMSOIL Synthetic Tractor Hydraulic/Transmission Oil provides continuous frictional stability for long-term smooth brake operation.

Feature: Multi-Viscosity
Benefits: Excellent cold and hot weather protection, no seasonal change outs

Feature: Universal Applications
Benefits: Inventory consolidation, no misapplications

Feature: Stable Friction Modifier Additives
Benefits: Correct and decisive multi-disc/clutch operation, excellent control over brake chatter, smooth operation, extended oil and equipment life

Feature: Anti-Foam Additives
Benefits: Rapid air release, cooler operation, smooth brake operation, control over fade and spongy hydraulic response

Feature: Oxidation Inhibitors
Benefits: Excellent resistance to oil degradation at high temperatures, extended lubricant and equipment life

Feature: Seal and Hose Conditioners
Benefits: Compatible with all seal materials, seal and hose flexibility, positive seal seating, reduced oil leaking, extended seal and hose life, fewer blown hoses

Feature: Superior Anti-Wear Additives
Benefits: Scoring and gear wear protection under all load conditions, extended equipment life even under severe conditions, increased pump and valve life, may be used in final drives calling for a UTTO

APPLICATIONS
AMSOIL Synthetic Tractor Hydraulic/Transmission Oil is Recommended for equipment combinations of transmissions, hydraulic systems, final drives, power take-off systems and wet brakes operating in "all weather" hot and cold temperatures, including, but not limited to, the following:

  • Farm tractors and equipment
  • Fork lift trucks
  • Pavement rollers
  • Off road equipment:
    • Loaders
    • Backhoes
    • Bulldozers
    • Tractors
    • Logging equipment
  • Ditchers
  • Concrete formers
  • Lawn tractor hydrostatic transmissions
  • Golf course mower hydrostatic systems
  • 4x4 ATV models with wet brake differentials
PERFORMANCE DATAAMSOIL Synthetic Tractor Hydraulic/Transmission Oil is recommended for applications that require any of the listed specifications:
  • AGCO/Duetz-Allis/Allis-Chalmers
    Power Fluid 821 XL, 257541, 246634
  • Allison - C-4, C-3, C-2
  • Case Corp. J.I. Case & IH
    MS-1207 (Hy-Tran® Plus), MS-1210 (TCH Fluid JIC145), MS-1230 (Poclain Equip-high pressure systems), B-6, MS-1206 (PTF), MS-1205 (TFD-II), MS-1204 (TFD), JIC-185, JIC-144, JIC-143, B-5
  • Belarus
  • Caterpillar - TO-2
  • Clark - TA 12, TA 18, HR 500, HR 600
  • Dresser CED - Trans/Hyd Fluid
  • Hesston Fiat - Oilofiat Tutela Multi-F, AF-87
  • John Deere - J20C, J20D (Winter grade), J20A/B, J14B, JD 303, J21A
  • Kubota - UDT
  • Landini - Tractor II Hyd. Fluid
  • Leyland
  • Massey-Ferguson - M-1141 (Permatran® III), M-1135, M1143, M1129-A, M-1127-A/B, M-1110
  • New Idea Power Units
  • New Holland Ford - M2C134-A/B/C/D, FNHA-2-C-201.00, FNHA-2-C-200.00 (Winter grade), M2C86-B, M2C53-A, M2C41-B, M2C48-C
  • Oliver - Q-1802 Type 55
  • Steiger - Hyd/Trans SEMS 17001
  • Sundstrand - Hydrostatic Transmission Fluid
  • Valmet
  • Versatile - M2C134-D FNHA-2-C-201.00, Spec 24M, Spec 23M
  • White Farm (Oliver) - Q-1826, Q-1802, Q-1766B, Q-1722, Q-1705
  • Yanmar

® Registered Trademarks

INSTALLATION
AMSOIL Hydraulic/Transmission Oil is fully compatible with conventional tractor hydraulic/transmission oils. To install AMSOIL Hydraulic/Transmission Oil in a hydraulic system, drain the existing hydraulic/transmission oil, change filters and install AMSOIL Synthetic Tractor Hydraulic/Transmission Oil.AMSOIL Synthetic Tractor Hydraulic/Transmission Oil is recommended for the replacement of, but not limited to, the following oils:ARCO Tractor Fluid; BP Tractran UTH; Case Hytran; Chevron Torque Fluid; Chevron Tractor Hydraulic Fluid; Conoco Power-Tran III Fluid; Conoco Farm Master; Gulf Universal Tractor Fluid; John Deere Hy-Gard; Kendall HYKEN 052; Kubota UDT; Lubrication Engineers 7500; Lubriplate UTF C-4; New Holland, Ford M2C134-D & FNHA-2-C-200.00 & 201; Mobilfluid 300, 350 and 424; Pennzoil HYDRA-TRANS; Phillips HG Fluid; Royal Purple SYN-TRACTOR III WG; Shell Donax TD

TYPICAL TECHNICAL PROPERTIES

AMSOIL Synthetic Tractor Hydraulic/Transmission Oil (ATH)

SAE Viscosity

5W-30

Kinematic Viscosity @ 100°C, cSt (ASTM D-445)

9.7

Kinematic Viscosity @ 40°C, cSt (ASTM D-445)

56.0

Viscosity Index (ASTM D-2270)

159

Flash Point °C (°F) (ASTM D-92)

246 (475)

Fire Point °C (°F) (ASTM D-92)

266 (510)

Pour Point °C (°F) (ASTM D-97)

-44 (-47)

Four Ball Wear Test
(ASTM D-4172B: 40 kg, 75°C, 1200 rpm, 1 hr.) Scar, mm

0.35

Cold Crank Simulator -30°C (ASTM D-5293)
5,617
Brookfield Viscosity (ASTM D-2683) @ -40°C
18,105
 

What You Get With AMSOIL

(1) Quality: a full line of synthetic lubricants and ultra-fine filters whose performance and durability is second to none. AMSOIL quality means increased reliability, more economical operation, and less maintenance and downtime. Using AMSOIL saves time, aggravation and MONEY!

(2) Service: conscientious and dedicated attention to detail from AMSOIL INC. and your servicing AMSOIL Dealer.

Your independent AMSOIL Dealer uses AMSOIL products himself, so he knows the benefits and is eager to show you how you can profit using AMSOIL. His confidence and enthusiasm are direct results of the quality of AMSOIL products and the integrity of AMSOIL INC.

AMSOIL INC. has a toll-free number so customers can order AMSOIL products directly, and offers a convenient credit plan for commercial accounts. The AMSOIL Technical Services Department is always ready to answer your lubrication or filtration questions.

(3) Expertise: the know-how that comes from three decades of experience tailoring AMSOIL products to meet customers’ needs. AMSOIL INC. manufactured the first synthetic motor oil in the world to pass American Petroleum Institute (API) service qualification tests. AMSOIL is “The First in Synthetics.” The leadership of AMSOIL in developing state-of-the-art synthetic lubrication and filtration solutions provides the consumer with a choice found nowhere else — the best lubrication that science has to offer.

If you’re looking for ways to add
PROFIT to your business by cutting your
operating costs, come to AMSOIL!

 

AMSOIL Saved These Farmers
Time and Money!

Wallace Dunn, Richfield, KS: I started using AMSOIL in the spring of 1983. Using AMSOIL SAE 30 Diesel Oil and the AMSOIL By-Pass Oil Filter, we run 900 hours between oil changes on the 160 HP Case and 700 hours in our 120 HP Deutz Allis air-cooled. I use the AMSOIL 20W-50 Synthetic Oil in my Massey 510 combine on a two-year oil change schedule. I am very pleased I was introduced to AMSOIL Products.

Harold Isaac, Hooker, OK: I use AMSOIL Synthetic Engine Oil, Synthetic Multi- Purpose Hydraulic Fluid and the AMSOIL 80W-90 Synthetic Gear Lube in my two Deere tractors, my 855 Steiger and my N6 Allis combine. I also use the AMSOIL By-Pass Oil Filters and change oil once a year. Our farm uses nothing but AMSOIL and we are happy with the results. There is a large difference in performance between petroleum oil and AMSOIL, as well as a lot of money and time saved.

 

Warren Bowker, Richfield, KS : I started using AMSOIL in 1975, and right off I could see the difference, so I put it in everything on the farm. I use AMSOIL 10W-40 Synthetic Oil in my six tractors – three Internationals and three John Deeres – and in my
Massey combine. We use the AMSOIL 15W-40 in our two semis, a Mack and a Detroit engine, along with the related AMSOIL Synthetic Lubes in the transmissions and differentials. AMSOIL 75W-90 Gear Lube is in the irrigation gear heads and this has lowered the fluid temperatures considerably. We are 100% AMSOIL and plan on staying that way.

Steve Patterson, Copeland, KS: One of our irrigation engines runs all year with no oil
change using AMSOIL and AMSOIL By-Pass Oil Filter. AMSOIL 75W-90 Synthetic Gear Lube is used in the gear heads on a five-year change period. My records show that I’m saving 58 cents on the dollar on lube cost between the cost of AMSOIL and petroleum lubes.

Francis and Rock Ormiston, Kismet, KS:
We have been using AMSOIL totally since 1974. We farm separately but do, on occasion, interchange some machinery. Between us we have four large 4-wheel drive John Deere tractors from 200 to 400HP. We use AMSOIL in all the tractors and the combine, and the AMSOIL By-Pass Filters, too. We change oil once a year in the early spring. We have not figured our real savings by using AMSOIL, but for sure it’s a strong
50 cents on the dollar over petroleum oil, and saving a lot of labor on very little downtime. There is no way we could afford to go back to petroleum, even if it was
given to us free.

 

Web Site Questions: webmaster@freeoilhelp.com

www.inthesuntech.com